IQBRT8
SECTION 41b
IQBRT8OPS 020403
Version 1 Issue 7
41b.14
OPERATION FROM AN ACTIVE CONTROL PANEL
The card may be operated with an active control panel via the RollCall™ network.
The menus available for this card are shown on page opposite and will appear in the Control display window.
Operational details for the remote control panel will be found in SECTION 1 of the Modular System Operator's
Manual.
MENU DETAILS
(see IQBRT8 Menu System Opposite)
Note that menus for the IQBRT6 are the same the
IQBRT8 except for the number of inputs and
outputs.
MAIN MENU
The main, or top level menu allows various sub-
menus to be selected by pressing the button
adjacent to the required text line.
Note that where a menu item is followed by three
dots (...) this indicates that a further sub-menu may
be selected.
Whenever a menu item is selected the parameters
of that selection will be displayed in the Information
window of the front panel. Where the selection is
purely a mode selection and does not enable a
sub-menu, the text will become reversed (white-on-
black) indicating that the mode is active. If the
mode is not available for selection the text will
remain normal.
◀
Crosspoint…
This function allows the input/output routing to be
set up and operated.
Crosspoint
Router...
Take!
Protect...
Monitor...
Cancel!
Enable_Take
◀
◀
◀
◀
Router…
The Router allows the assignment of any of the
outputs (destinations) to any of the inputs
(sources) or to silence.
◀
Dest_1 to 7
Dest_2 to 8
▶
When a destination is selected this will reveal a
menu that allows any of the sources (or silence) to
be routed to this destination.
◀
◀
◀
◀
Take!
Selecting this function will enable the changes
made to the router assignments.
Cancel!…
▶
Selecting this function will cancel any changes
made to the router assignments if the
Enable_Take
function has been selected.
