![background image](http://html1.mh-extra.com/html/snell-and-wilcox/arc130s/arc130s_operators-manual_1309051018.webp)
ARC130S
SECTION 3
Installation
ARC130S 060801 Version 1 Issue 1
3.10
SWITCHING ON
Check that power is connected to the unit and is
switched on. Open the front panel by pushing up
the levers at the ends of the panel, and hinging the
panel down and sliding partly out.
Set the switch on the Power Unit (see fig. 3.1) to
on. Check that the indicator lamp illuminates green
and the alpha-numeric display is active.
Fig. 3.1 PCB Locations ARC 130S
Front panel &
Remote Control
Remote
Control
SW4 SW3
FAN FAIL WARNING
If when the power is turned ON the power indicator is RED and the card edge alpha-numeric display on the
active front panel displays
FAN FAIL
message, the unit should be turned OFF as this indicates a failure of the
cooling fan which is located behind the power switch panel.