ARC130S SECTION
4
ARC130S 060801 Version 1 Issue 1
4.17
Modes
Pair 1-2, Pair 2-1
This selects the way the input video fields are
paired before the application of the two-field pairing
mode filter (see above).
`If Pair 1-2 is selected then field 1’s are grouped
with the following field two.
If 2-1 is selected then field 2’s are grouped with the
following field 1’s.
Pair Off/On
Turning Pairing mode On causes the ARC to pair
up the incoming video fields into frames before
applying a two field vertical temporal aperture.
If a user has material that has all the programme
cuts on field 1’s, then selecting Pair As 1-2 (see
below) will ensure that the interpolation never
bleeds across programme cuts.
If the material has all cuts on field 2’s then
selecting Pair As 2-1 will ensure that there is no
interpolation across cuts.
Modes
Film
Normal
Vid >2:2
2:2 Fil
2:2 2:2
Pair 1-2 / 2-1
Pair Off / On
Filter
Normal
Single
