SMC Networks Series HRS012-A Installation And Operation Manual Download

Page: 60 / 166

HRX-OM-M090

Chapter 5 Display and setting of various functions

5.4

Alarm display menu

HRS Series

5-8

5.4

Alarm display menu

5.4.1 Alarm

display

menu

The alarm display screen appears when an alarm is generated.

∗

The alarm display menu cannot be accessed when no alarm has been

generated.

∗

Refer to “Chapter 7 Alarm indication and trouble shooting” for the content

of alarms.

5.4.2

Content of display of alarm display menu

The alarm display screen appears when an alarm is gernerated.

When multiple alarms are generated, the latest alarm is displayed on the
screen.

Each time the [SEL] key is pressed, the alarms are displayed in order,
starting from the latest one.

The main screen is displayed when the alarm is reset.

The main screen is displayed when [MENU] key is pressed while an alarm is
output.

The alarm display screen is displayed if [MENU] key is pressed again.

Alarm code

Alarm history

［

SEL

］

［

］

Alarm

release

Summary of Contents for Series HRS012-A







































































































































































Search results

Summary of Contents for Series HRS012-A

Reviews:

Related manuals for Series HRS012-A

Brands by name

Popular brands

SMC Networks Series HRS012-A, Installation And Operation Manual

Search results

Summary of Contents for Series HRS012-A

Reviews:

Related manuals for Series HRS012-A

Brands by name

Popular brands