HRX-OM-M090
Chapter 5 Display and setting of various functions
5.2
Function
HRS Series
5-4
5.2.2
List of parameters
Table 5.2-1“List of parameter (1/3)” and Table 5.2-3“List of parameter (3/3)”
show the parameters of the thermo-chiller.
Table 5.2-1 List of parameter (1/3)
Display
Item
Initial value
(Default setting)
Reference
page
Category
Circulating fluid temperature
(TEMP PV)
Temperature
Circulating fluid set temperature (TEMP
SV)
20
o
C (68
o
F)
Circulating fluid outlet pressure
Electric resistivity/conductivity
5.3
Main display
X X
Alarm no.
5.4
Alarm
display
menu
Circulating fluid outlet temperature
Circulating fluid return port temperature
Temperature of the compressor inlet.
Circulating fluid outlet pressure
Pressure of higher pressure refrigerant
circuit
Pressure of lower pressure refrigerant
circuit
Electric resistivity/conductivity
Accumulated operation time of the pump
Accumulated operation time of the fun
motor
Accumulated operation time of the
compressor
Accumulated operation time
5.5
Check
monitor
menu
Key-lock OFF
5.6
Run timer
0.0H
Stop timer
0.0H
5.7
READY mode
OFF
READY band width
0.0
o
C (0.0
o
F)
READY time
10 sec
5.8
Offset mode
OFF
Offset temperature
0.0
o
C (0.0
o
F
)
5.9
Recover from power failure
OFF
5.10
Anti-freezing OFF
5.11
Key click sound
ON
5.12
Temperature unit
C
5.13
Pressure unit
MPa
5.14
Data reset
NO
5.17
Pump accumulated operating time reset
NO
Fun motor accumulated operating time
reset
NO
Compressor accumulated operating
time reset
NO
5.18
Option
【
Drain pan set
】
OFF 6.2
Option
【
Electric resistivity/conductivity
sensor set
】
OFF 6.4
Unused
- -
Unused
- -
Unused
- -
Unused
- -
Setting
menu
