SMC Networks IZT40 Series, Operation Manual

Page: 42 / 81

４２
3)Error, and maintenance warning
Note 36) It takes 3 seconds to operate after the power is on.
Note 37) Abnormality can be released by the ion generation stop signal.
Release the error after recovery.
Note 38) Frequency with problem is displayed by flashing error code.
Refer to [4-5-2. Alarms for IZT41, IZT42].
Note 39) Frequency of the high voltage power supply module with a problem is
displayed by flashing error code. Refer to [4-5-2. Alarms for IZT41, IZT42].
High voltage power supply module without problem indicates normal status.
Note 40) Ion balance of the high voltage power supply module with problem turns off.
Refer to [4-5-2. Alarms for IZT41, IZT42].
High voltage power supply module without problem indicates normal status.
Note 41) All connected high voltage power supply module ION/HV flash (green).
Note 42) All ION/ HV of CH1 to 4 flash (red).
Note 43) All connected high voltage power supply module ION/HV flash (red).
Note 44) High voltage power supply module ION/HV with problem flashes (red).
Note 45) High voltage power supply module ION/HV with problem turns on (red).
Note 46) High voltage power supply module DAC/AC with problem turns off.
Note 47) High voltage power supply module NDL with problem turns off.
Note 48) The screen at the time of problem holds the status before the problem.
Note 49) All the selected bars (high voltage power supply module) stop the ion generation.
Note 50) Bar with a problem (high voltage power supply module) stops the ion generation.
Communication error
Error code
：
E4
Fan motor failure
Error code
：
E5
Built-in sensor (green) SNSR
Product type IZTP41(green)
IZTP42(blue)
DAC/AC
Maintenance (green) NDL
ION/HV
Incorrect high voltage (red)
Ion generating status
Key-lock (green) KEY
D
is
p
la
y
CH display
Selected CH to display
CH
CH display
CH which display is not
selected
CH display
High voltage power supply
module disconnected
Frequency Hz
ION BALANCE
―
Ions are generated (green)
O
u
tp
u
t
Maintenance detection signal
(Normally OFF)
―
Error signal
(Normally ON)
―
Controller button
▲
/
▼
/ S button
Incorrect high voltage
Error code
：
E3
Display Status
CPU failure
(controller)
Error code
：
E0
Power supply failure
Error code
：
E1
CPU failure
(High voltage power supply
module)
Error code
：
E2
―
In
p
u
t
Power 24 VDC
―
Ion generation stop
External input signal
―
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Error Error Error
Note 48) Note 48) Note48)
Error
Note 48)
無効 有効
ON
OFF
ON
OFF
Power
OFF
Power
ON
Power
OFF
Power
ON
Power
OFF
Power
ON
ON
OFF
Note 48) Note 48) Note 48)
1Hz
Note 38)
1Hz
Note 38)
1Hz
Note 39)
1Hz
Note 39)
1Hz
Note 42)
1Hz
Note 43)
1Hz
Note 44)
Note 45)
Note 36) Note 36) Note 36)
ON
OFF
1Hz 1Hz 1Hz 1Hz
Note 37)
Note 40) Note 40)
Note 49) Note 49) Note50) Note 50)
Error
Note 48)
Power
OFF
Power
ON
Error
Power
OFF
Power
ON
Note 48) Note 48)
Note 48)
1Hz
Note 39)
1Hz
Note 39)
1Hz
Note 44)
1Hz
Note 44)
Note 37)
Note 36) Note 36)
1Hz 1Hz
Note 37)
Note 40) Note 40)
Note 50) Note 50)
Note 47) Note 47) Note 47) Note 47) Note47)
Generate
Stop
Output signal over current
Error code
：
E8
(Error signal)
Error code
： E9
(Maintenance signal)
Maintenance warning
Built-in sensor (green) SNSR
Product type IZTP41(green)
IZTP42(blue)
DAC/AC
Maintenance (green) NDL
Incorrect high voltage (red)
ION BALANCE
―
Ion generating status
Key-lock (green) KEY
D
is
p
la
y
CH display
Selected CH to display
CH
CH display
CH which display is not
selected
CH display
High voltage power supply
module disconnected
Frequency Hz
Ions are generated (green)
ION/HV
O
u
tp
u
t
Maintenance detectio signal
(Normally OFF)
―
Error signal
(Normally ON)
―
Controller button
▲
/
▼
/ S button
High voltage power supply
module not connected
Error code
：
--
Inconsistent module
Error code
：
E6
Duplication of CH
Error code
：
E7
Display Status
―
In
p
u
t
Power 24 VDC
―
Ion generation stop
External input signal
―
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
無効 有効
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Error
Note 48)
Power
OFF
Power
ON
Error
Note 48)
Note 48) Note 48)
1Hz
Note 39)
1Hz
Note 39)
1Hz
Note 44)
1Hz
Note 44)
Note 36)
1Hz
Note 40) Note 40)
Note 46) Note 46)
Note 50) Note 50)
Warning
Note 48)
Power
OFF
Power
ON
Error
Note 48)
Error
Power
OFF
Power
ON
Note 48) Note 48)
1Hz
Note 38)
1Hz
Note 38)
1Hz
Note 41)
Note 37)
Note 36) Note 36)
Note 48)
1Hz 1Hz
Note 48) Note 47) Note 47)
Generate
Stop