SMC Networks IZT40 Series, Operation Manual, Page: 31 / 81

３１
3)High voltage cable
Ⅰ
. High voltage cable connection
·
Connect the high voltage cable at the bar end to the high voltage power supply module.
·
When connecting and disconnecting the high voltage cable, hold the plugs together with the plug bodies,
and insert or pull out straight. If mounted or removed in an inappropriate direction, the mounting part of
the modular jack may be damaged and cause operation failure.
·
Do not touch part A when handling the plug.
Be careful so that moisture oil or foreign
matter does not adhere to the plug.
Adhesion of moisture, oil or foreign matter
on part A may cause high voltage electric
leakage. If moisture, oil, or foreign matter
adheres to part A, clean it with ethanol.
·
After connecting the high voltage cable to
the high voltage power supply module, fix
the cable using 2 cross recessed round
head screws (M4x10) included with the
product.
Tightening Torque: 0.49 to 0.53 Nm
Ⅱ
. Wiring high voltage cable
·
When installing the high voltage cable, use the specified high voltage cable holder.
·
Refer to "6. Dimensions" section for details.
a. High voltage cable holder (straight)
·
Use 2 cross recessed round head screws (M4) for installing the high voltage cable holder. Press the
cable positioning it into the holding position and install it. (The screws should be prepared by the user).
Tightening torque: 0.19 to 0.21 Nm
Plug
M4 screw
IZTP40, IZTP41, IZTP42
High voltage power supply module
(Figure shows IZTP41)
High voltage cable
M4 screw
IZT40-E1
High voltage
cable holder
(straight)
High voltage cable
Holding position
High voltage connector
(
裏面
)
A A