SMC Networks IZT40 Series, Operation Manual, Page: 27 / 81

２７
c.Install to the DIN rail.
·
After installing the DIN rail mounting bracket, fix the controller and high voltage power supply module
to the DIN rail using M4 screws.
Tightening Torque: 1.30 to 1.50 Nm
Ⅱ
. When the controller and high voltage power supply module are connected by separate cable
·
Mount the spacers to the high voltage power supply module connector. Refer to 3-1-6. Connect the
controller and high voltage power supply module.
a. DIN rail mounting bracket
·
Fix the DIN rail mounting bracket to the controller and high voltage
power supply module using M4 screws.
Tightening Torque: 1.30 to 1.50 Nm
b. Install to the DIN rail.
·
After installing the DIN rail mounting bracket, fix the controller and
high voltage power supply module to the DIN rail using M4 screws.
Tightening Torque: 1.30 to 1.50 Nm
c. Connection of separate cable
·
Mount the spacers (included) to fix the separate cable to the high
voltage power supply module.
·
Fix the spacers (2pcs.) to the plug (male side) of the D-sub
connector with high voltage power supply module.
·
Connect the controller and high voltage power supply module after
mounting the spacers and fix them using M2.6 screws. Refer to
3-1-6. Connect the controller and high voltage power supply module.
Spacer tightening torque: 0.4 to 0.6 Nm
Separate cable tightening torque:0.25
～
0.35 Nm
Fix with M4 screws
(Include)
Fix with M4
screws
(Included)
IZT40-B1
DIN rail mouting bracket
for controller
Holding screw
D-sub connector
Plug
IZT40-B2
High voltage power
supply module
DIN rail mounting bracket
for IZTP40/IZTP41
Fix with M4
screws
(Included)
Holding screw
IZT40-B2
High voltage power
supply module
DIN rail mounting bracket
for IZTP40/IZTP41
E : Remove the fixing bracket.
IZT40-B1
DIN rail mounting bracket
for controller