![background image](http://html1.mh-extra.com/html/smc-networks/ex600-wd-series/ex600-wd-series_operation-manual_1300764054.webp)
Problem
No.
Phenomenon
Possible causes
Investigation and countermeasures
5
W-MS: Red
LED flashing
(1) Power supply for the base is OFF
(2) Outside the wireless coverage area
(1) Check that the power supply voltage
for control and input (US1) is supplied
to the base and remote.
(2) The distance which wireless
communication between wireless
systems can be established may have
been exceeded.
Reconsider the operating environment,
such as the installation conditions of the
base and remote.
W-NS: Red LED
is ON
No remotes are connected
Replace the remote
If the error is not restored after
replacement, stop using the equipment
and contact your SMC sales
representative.
W-NS: Red /
green LED
In pairing mode.
The system has been set to "Pairing
enable". Change the setting to "Pairing
disable" when pairing is not conducted.
Check the registration status of the base.
Turn on the power with the pairing
connector is connected,
W-NS: OFF
(1) Remote not registered
(2) Power for control is not supplied
(1) Check the registration status of the
remote and perform pairing correctly.
(2) Check that the power supply voltage
for control is supplied to the remote.
Summary of Contents for EX600-WD Series
Page 26: ...information is Simple or Detailed...
Page 42: ...Dimensions EX600 WD E1...
Page 43: ...EX600 WD A1...