SMC Networks EX600-WD Series, Operation Manual

Page: 40 / 56

- Registration should be performed with power supplied to both the base and remote.
- For the Input size and Output size of the remote, the setting of wireless registration will
be reflected to the base.
When changing the number of Input and Output points of the remote, pairing should be
performed again.
- The setting of the Input and Output points of the wireless base is valid all the time. Be careful
that the I/O map will be different if the setting is changed after constructing the I/O map.
After changing, the setting is reflected by pressing the [Reset] button or by supplying the
power again.
- For the grommet type, the mode is not changed automatically even when the registration
completes correctly.
Turn on the power again with the pairing cable connected with the short jumper.