# Dummy remote
The dummy remote can register a "Dummy area" in the I/O map. A remote can be added without
changing the I/O map by registering the remote to the "Dummy area" even after system construction.
The remote allocation order to the I/O map is from the smallest channel to the largest channel
registered by the wireless channel which has been set during remote.
At the time, the wireless channel in which no remote is registered will be ignored.
When adding a new remote, it may be required to change the I/O map depending on the wireless
channel number.
The dummy remote can be registered only with the base unit.
# Dummy remote
(1)
Change of operation mode
of the base
Enable the pairing setting of the remote registration of the base and reflect the change by
clicking
Reset module
or by re-supplying power. Then, update the contents on the screen by
clicking the
Refresh
button.
(2)
Inputs / outputs setting
of dummy remote
Set the number of inputs and outputs of the dummy remote.
(3) Allocation of the dummy remote to the
required wireless channel
Select the required wireless channel and click
Insert
so that the set dummy remote is displayed
in the box for "Registered remotes".
(Dummy remote registration is not complete at this point. The status is "Waiting for registration".)
(4) Determination of dummy remote
registration information
Click the
Save reg-info
to reflect the registered information.
(When registration has been completed successfully, the status of the dummy remote will change
to "registered".)
Now, the registration procedure for the dummy remote is complete.
- To reserve the dummy remote registration, it is necessary to set the number of inputs / outputs.
If a remote with inputs / outputs which are different from the set numbers is registered, the I/O
map should be changed.
Summary of Contents for EX600-WD Series
Page 26: ...information is Simple or Detailed...
Page 42: ...Dimensions EX600 WD E1...
Page 43: ...EX600 WD A1...
