![background image](http://html1.mh-extra.com/html/smc-networks/ex600-wd-series/ex600-wd-series_operation-manual_1300764032.webp)
(3) The I/O Configurator has two modes: a supervisor mode which can change the parameter setting
and a monitor mode which can only read the parameters.
It is necessary to change the mode to the Administrator mode to set the parameters.
Administrator mode: available to read and write the parameters.
Monitor mode: available to read the parameters only. Writing parameters is not available.
Enter the correct password to enter administrator mode.
Default password : admin
If the password is forgotten, use the [Clear password] function. When the [Clear password] button is
pressed, the password clear window will appear. The password will be cleared when master factory
key is entered. Then it is possible to enter administrator mode without inputting the password.
Master key: ADMIN
A password can be set using the supervisor mode to prevent mischievous action by others.
It is recommended to change the default password at the time of first access.
Summary of Contents for EX600-WD Series
Page 26: ...information is Simple or Detailed...
Page 42: ...Dimensions EX600 WD E1...
Page 43: ...EX600 WD A1...