![background image](http://html1.mh-extra.com/html/smc-networks/ex600-wd-series/ex600-wd-series_operation-manual_1300764010.webp)
SMC Wireless System Features
The SMC wireless system has the following features.
- Quick start-up takes 0.25 sec.(minimum) to connect to the system when the remote is powered.
*1
- Parameter setting by Near Field Communication (NFC) using a PC (no HW setting).
- A maximum of 127 remotes can be registered to one base
*2
.
- The maximum number of I/O points of wireless system is 1280 for input and output.
*3,4
- The maximum number of base I/O points is 128 for input and 128 for output.
- The maximum number of remote I/O points is 128 for input and 128 for output.
*1: The base is in start-up mode, and will change depending on the remote power-on timing and
external influences.
*2: The maximum number of units that can be connected is 127. If 127 units is exceeded, the unit I/O
will not be recognised.
There might be communication delay depending on the communication load status.
※
3
:
The maximum number of I/O points is 1280 for input and 1280 for output. When exceeding 1280
points, the unit I/O is not recognized.
There might be communication delay depending on the communication load status.
※
4: Total number of base I/O points and registered remote I/O points.
<Important>
The product is certified as a wireless equipment in accordance with the Radio Act and the certification
of construction type has been obtained. Customers do not need to apply for a license to use this
equipment.
Be sure to comply with the following precautions.
- Do not disassemble or modify the product. Disassembly and modification are prohibited by law.
This product is compliant with the Radio Act in Japan. For use in other countries, please consult
SMC.
● This product communicates by radio waves, and the communication may stop instantaneously due to
ambient environments and operating methods. SMC will not be responsible for any secondary
failure which may cause an accident or damage to other devices or equipment.
● When several units are installed closely to each other, slight interference may occur due to the
characteristics of the wireless product.
# Radio waves emitted by this product may adversely affect implantable medical devices such as
implantable cardiac pacemakers and implantable defibrillators.
For precautions regarding the use of equipments or devices that may adversely affect performance,
refer to the catalogue or instruction manual of the device or equipment, or contact the manufacturer
directly.
● The communication performance is affected by the ambient environment, so please perform the
communication testing before use.
Summary of Contents for EX600-WD Series
Page 26: ...information is Simple or Detailed...
Page 42: ...Dimensions EX600 WD E1...
Page 43: ...EX600 WD A1...