manualshive.com logo in svg

SMC Networks 7824M/FSW - annexe 1, Management Manual

The SMC Networks 7824M/FSW - annexe 1 is a powerful networking device that requires careful management to maximize its potential. Get the comprehensive Management Manual for this product for free download, exclusively from manualshive.com. This manual offers in-depth instructions and valuable insights to optimize your networking experience. Dive into the details now!

Share
Download
background image

VLAN C

ONFIGURATION

12-16

belonging to the port’s default VLAN (i.e., associated with the PVID) 
are also transmitted as tagged frames. 

-

Hybrid

 – Specifies a hybrid VLAN interface. The port may transmit 

tagged or untagged frames.

-

Dot1q-Tunnel

 – Configures IEEE 802.1Q tunneling (QinQ) to 

segregate and preserve customer VLAN IDs for traffic crossing the 
service provider network. See “Configuring IEEE 802.1Q 
Tunneling” on page 12-17 for a detailed description of this feature.

•

TPID (0-65535)

 – Tag Protocol Identifier specifies the ether-type of 

incoming packets on a tunnel port. See “Configuring IEEE 802.1Q 
Tunneling” on page 12-17 for a detailed description of this parameter.

•

Trunk Member

 – Indicates if a port is a member of a trunk. To add a 

trunk to the selected VLAN, use the last table on the VLAN Static Table 
page. 

Web

 – Click VLAN, 802.1Q VLAN, Port Configuration or Trunk 

Configuration. Fill in the required settings for each interface, click Apply.

Figure 12-7  VLAN Port Configuration

Summary of Contents for 7824M/FSW - annexe 1













































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 7824M/FSW - annexe 1

Brightlink 16x16 Manual preview
16x16
Brand: Brightlink Pages: 33
AVLT-Power AcePro-CE89-1 Quick Installation Manual preview
AcePro-CE89-1
Brand: AVLT-Power Pages: 12
Little Giant ACS-3 Installation, Operation, Maintenance & Repair Parts preview
ACS-3
Brand: Little Giant Pages: 2
Greengate VNLW-P-1001-MV-N-V Installation Instructions preview
VNLW-P-1001-MV-N-V
Brand: Greengate Pages: 2
Key Digital HD Flash 4 KD-SW4x1 Operating Instructions Manual preview
HD Flash 4 KD-SW4x1
Brand: Key Digital Pages: 12
LIVOLO VL-C302S-61 Manual preview
VL-C302S-61
Brand: LIVOLO Pages: 14
Moxa Technologies PT-G7509 Hardware Installation Manual preview
PT-G7509
Brand: Moxa Technologies Pages: 7
TRENDnet TE100-S24D Specifications preview
TE100-S24D
Brand: TRENDnet Pages: 2
Vagner Pool PRO PIEZO 1 Instruction Manual preview
PRO PIEZO 1
Brand: Vagner Pool Pages: 5
IBM 4002-C4A Installation And User Manual preview
4002-C4A
Brand: IBM Pages: 94
B&B Electronics ICE-104P How To Use preview
ICE-104P
Brand: B&B Electronics Pages: 2
Abtus AVS-HDMI81 User'S Operation Manual preview
AVS-HDMI81
Brand: Abtus Pages: 4
PortaOne PortaSwitch Handbook preview
PortaSwitch
Brand: PortaOne Pages: 78
Veris Industries Hawkeye 909 Installation Manual preview
Hawkeye 909
Brand: Veris Industries Pages: 2
Shinybow USA SB-5688CAK Instruction Manual preview
SB-5688CAK
Brand: Shinybow USA Pages: 32
Zamel RWS-311D/Z Manual preview
RWS-311D/Z
Brand: Zamel Pages: 4
Black Box KVS4-1002D User Manual preview
KVS4-1002D
Brand: Black Box Pages: 15
lifeSMART BLEND Smart LS055 Quick Start Manual preview
BLEND Smart LS055
Brand: lifeSMART Pages: 13

Brands by name

Popular brands

Load more brands