manualshive.com logo in svg

SMC Networks 7824M/FSW - annexe 1, Management Manual

Share
Download
SMC Networks 7824M/FSW - annexe 1 Management Manual Download Page 278

VLAN C

ONFIGURATION

12-20

3. After packet classification through the switching process, the packet is 

written to memory with one tag (an outer tag) or with two tags (both 
an outer tag and inner tag).

4. The switch sends the packet to the proper egress port.
5. If the egress port is an untagged member of the SPVLAN, the outer 

tag will be stripped. If it is a tagged member, the outgoing packets will 
have two tags.

Layer 2 Flow for Packets Coming into an Uplink Port

An uplink port receives one of the following packets:

• Untagged
• One tag (CVLAN or SPVLAN)
• Double tag (CVLAN + SPVLAN)

The ingress process does source and destination lookups. If both lookups 
are successful, the ingress process writes the packet to memory. Then the 
egress process transmits the packet. Packets entering a QinQ uplink port 
are processed in the following manner:

1. If incoming packets are untagged, the PVID VLAN native tag is 

added.

2. If the ether-type of an incoming packet (single or double tagged) is not 

equal to the TPID of the uplink port, the VLAN tag is determined to 
be a Customer VLAN (CVLAN) tag. The uplink port’s PVID VLAN 
native tag is added to the packet. This outer tag is used for learning and 
switching packets within the service provider’s network. The TPID 
must be configured on a per port basis, and the verification cannot be 
disabled. 

3. If the ether-type of an incoming packet (single or double tagged) is 

equal to the TPID of the uplink port, no new VLAN tag is added. If 
the uplink port is not the member of the outer VLAN of the incoming 
packets, the packet will be dropped when ingress filtering is enabled. If 
ingress filtering is not enabled, the packet will still be forwarded. If the 
VLAN is not listed in the VLAN table, the packet will be dropped.

Summary of Contents for 7824M/FSW - annexe 1













































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands