manualshive.com logo in svg

SMC Networks 7824M/FSW - annexe 1, Management Manual

The SMC Networks 7824M/FSW - annexe 1 is a powerful networking device that requires careful management to maximize its potential. Get the comprehensive Management Manual for this product for free download, exclusively from manualshive.com. This manual offers in-depth instructions and valuable insights to optimize your networking experience. Dive into the details now!

Share
Download
background image

A

CCESS

 C

ONTROL

 L

IST

 C

OMMANDS

23-18

•

tagged-eth2 

– Tagged Ethernet II packets.

•

untagged-eth2 

– Untagged Ethernet II packets.

•

tagged-802.3 

– Tagged Ethernet 802.3 packets.

•

untagged-802.3 

– Untagged Ethernet 802.3 packets.

•

any

 – Any MAC source or destination address. 

•

host

 – A specific MAC address.

•

source

 – Source MAC address.

•

destination

 – Destination MAC address range with bitmask.

•

address-bitmask

27

 – Bitmask for MAC address (in hexidecimal 

format).

• vid – VLAN ID. (Range: 1-4093)
•

vid-bitmask

27

 – 

VLAN bitmask. (Range: 1-4093)

•

protocol

 – A specific Ethernet protocol number. (Range: 600-fff hex.)

•

protocol

-

bitmask

27

 – Protocol bitmask. (Range: 600-fff hex.)

Default Setting

None

Command Mode

MAC ACL

Command Usage

• New rules are added to the end of the list.
• The 

ethertype

 option can only be used to filter Ethernet II formatted 

packets. 

• A detailed listing of Ethernet protocol types can be found in RFC 

1060. A few of the more common types include the following:
- 0800 - IP
- 0806 - ARP
- 8137 - IPX

27.  For all bitmasks, “1” means care and “0” means ignore.

Summary of Contents for 7824M/FSW - annexe 1













































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 7824M/FSW - annexe 1

3Com Baseline 2226 Plus Datasheet preview
Baseline 2226 Plus
Brand: 3Com Pages: 4
hager EMN005 User Instructions preview
EMN005
Brand: hager Pages: 2
hager HIC4 A Series Quick Start preview
HIC4 A Series
Brand: hager Pages: 4
hager EGN100 Manual preview
EGN100
Brand: hager Pages: 2
Kramer VP-727XL User Manual preview
VP-727XL
Brand: Kramer Pages: 61
ATZ HDMI-161SM Manual preview
HDMI-161SM
Brand: ATZ Pages: 8
Gefen EXT-DVIKVM-441DL User Manual preview
EXT-DVIKVM-441DL
Brand: Gefen Pages: 32
Control 4 C4-SW120277 Series Installation Manual preview
C4-SW120277 Series
Brand: Control 4 Pages: 4
E-LINK LNK-IMC208P-SFP Quick Start Manual preview
LNK-IMC208P-SFP
Brand: E-LINK Pages: 6
S+S Regeltechnik HYGRASREG KW Series Operating Instructions, Mounting & Installation preview
HYGRASREG KW Series
Brand: S+S Regeltechnik Pages: 16
Electroswitch 31201B User Manual preview
31201B
Brand: Electroswitch Pages: 6
Samson 3768 Mounting And Operating Instructions preview
3768
Brand: Samson Pages: 48
Gefen GEF-UHD-89-HBT2 User Manual preview
GEF-UHD-89-HBT2
Brand: Gefen Pages: 232
Raritan MCC8 User Manual preview
MCC8
Brand: Raritan Pages: 46
CYP OR-HD62CD-4K22 Operation Manual preview
OR-HD62CD-4K22
Brand: CYP Pages: 32
StarTech.com SV211DPUA4K Quick Start Manual preview
SV211DPUA4K
Brand: StarTech.com Pages: 2
Microsens MS415259M Manual preview
MS415259M
Brand: Microsens Pages: 8
Linksys EtherFast EZXS55W v2 User Manual preview
EtherFast EZXS55W v2
Brand: Linksys Pages: 10

Brands by name

Popular brands

Load more brands