![SMC Networks 7824M/FSW - annexe 1 Management Manual Download Page 436](http://html.mh-extra.com/html/smc-networks/7824m-fsw-annexe-1/7824m-fsw-annexe-1_management-manual_1300676436.webp)
SNMP C
OMMANDS
20-10
notifications are enabled. If you enter the command with a keyword,
only the notification type related to that keyword is enabled.
• The
snmp-server enable traps
command is used in conjunction with
the
snmp-server host
command. Use the
snmp-server host
command to specify which host or hosts receive SNMP notifications.
In order to send notifications, you must configure at least one
snmp-server host
command.
• The authentication, link-up, and link-down traps are legacy
notifications, and therefore when used for SNMP Version 3 hosts,
they must be enabled in conjunction with the corresponding entries in
the Notify View assigned by the
snmp-server group
command
(page 20-15).
Example
Related Commands
snmp-server host (20-6)
snmp-server engine-id
This command configures an identification string for the SNMPv3 engine.
Use the
no
form to restore the default.
Syntax
snmp-server engine-id
{
local
|
remote
{
ip-address
}}
engineid-string
no snmp-server engine-id
{
local
|
remote
{
ip-address
}}
•
local
- Specifies the SNMP engine on this switch.
•
remote
- Specifies an SNMP engine on a remote device.
•
ip-address
- The Internet address of the remote device.
•
engineid-string
- String identifying the engine ID.
(Range: 10-64 hexadecimal characters)
Default Setting
A unique engine ID is automatically generated by the switch based on
its MAC address.
Console(config)#snmp-server enable traps link-up-down
Console(config)#
Summary of Contents for 7824M/FSW - annexe 1
