manualshive.com logo in svg

SMC Networks 7824M/FSW - annexe 1, Management Manual

Share
Download
SMC Networks 7824M/FSW - annexe 1 Management Manual Download Page 218

P

ORT

 C

ONFIGURATION

9-28

Showing Port Statistics

You can display standard statistics on network traffic from the Interfaces 
Group and Ethernet-like MIBs, as well as a detailed breakdown of traffic 
based on the RMON MIB. Interfaces and Ethernet-like statistics display 
errors on the traffic passing through each port. This information can be 
used to identify potential problems with the switch (such as a faulty port or 
unusually heavy loading). RMON statistics provide access to a broad range 
of statistics, including a total count of different frame types and sizes 
passing through each port. All values displayed have been accumulated 
since the last system reboot, and are shown as counts per second. Statistics 
are refreshed every 60 seconds by default.

Note:

RMON groups 2, 3 and 9 can only be accessed using SNMP 
management software such as HP OpenView. 

Table 9-4  Port Statistics

Parameter

Description

Interface Statistics

Received Octets

The total number of octets received on the interface, 
including framing characters.

Received Unicast Packets

The number of subnetwork-unicast packets delivered 
to a higher-layer protocol.

Received Multicast Packets The number of packets, delivered by this sub-layer to 

a higher (sub-)layer, which were addressed to a 
multicast address at this sub-layer. 

Received Broadcast 
Packets

The number of packets, delivered by this sub-layer to 
a higher (sub-)layer, which were addressed to a 
broadcast address at this sub-layer. 

Received Discarded 
Packets

The number of inbound packets which were chosen 
to be discarded even though no errors had been 
detected to prevent their being deliverable to a 
higher-layer protocol. One possible reason for 
discarding such a packet could be to free up buffer 
space.

Summary of Contents for 7824M/FSW - annexe 1













































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands