SMC Networks 7824M/FSW - annexe 1, Management Manual

Page: 670 / 748

Q
UALITY OF
S
ERVICE
C
OMMANDS
32-6
policy-map
This command creates a policy map that can be attached to multiple
interfaces, and enters Policy Map configuration mode. Use the
no form to
delete a policy map and return to Global configuration mode.
Syntax
[ no ] policy-map policy-map-name
policy-map-name - Name of the policy map. (Range: 1-32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
• Use the policy-map command to specify the name of the policy map,
and then use the class command to configure policies for traffic that
matches criteria defined in a class map.
• A policy map can contain multiple class statements that can be applied
to the same interface with the service-policy command (page 32-10).
• You must create a Class Map (page 32-6) before assigning it to a Policy
Map.
Example
This example creates a policy called “rd_policy,” uses the class command
to specify the previously defined “rd_class,” uses the set command to
classify the service that incoming packets will receive, and then uses the
police command to limit the average bandwidth to 100,000 Kbps, the
burst rate to 1522 bytes, and configure the response to drop any violating
packets.
Console(config)#policy-map rd_policy
Console(config-pmap)#class rd_class
Console(config-pmap-c)#set ip dscp 3
Console(config-pmap-c)#police 100000 1522 exceed-action drop
Console(config-pmap-c)#