HAT600P Series ATS Controller User Manual Page 56 of 58
Fig. 24 Breaker Application Diagram
Table 28 Related Settings
MCH: Energy-save Motor; MN: Undervolt Trip; MX: Open Coil; XF: Close Coil;
Part of Parameter Settings
Switch Type Setting
CB Class/CC Class
Aux. Output 1
Forced Open Input
Aux. Output 2
Breaker Trip Input
Aux. Output 3
S1 Open Output
Aux. Output 4
S2 Open Output
Aux. Output 6
Genset Start Output
NOTE 1
: Above are HAT600P series function application diagrams, among which HAT600P, HAT600PB
are not current sampling input, please neglect the current part of the diagrams.
NOTE 2
: Aux. Output 6 default setting is Genset Start Output (N/O), Aux. Output 6 only has N/C contact;
when controller is power off, it can also start genset with N/C contact; If controller uses DC supply,
Genset Start Output can also be changed to other N/O configurable output.
