SMART SE240 Installation And User Manual Download Page 48

Page: 48 / 100

Configuring the SMART Hub SE240

Press

Menu

The Welcome Center appears.

Press

Settings

The

Settings

dialog box appears.

If a password is required to change the configuration settings, type the password in the box at
the bottom of the menu, and then press

NOTE:

For information on the configuration settings password, see page 20.

Press

System and Language

View the system information.

You’ve viewed the system information.

Press

Menu

The Welcome Center appears.

Press

Settings

The

Settings

dialog box appears.

If a password is required to change the configuration settings, type the password in the box at
the bottom of the menu, and then press

NOTE:

For information on the configuration settings password, see page 20.

To view system information

To disable system hardware settings

Summary of Contents for SE240





































































































Search results

Summary of Contents for SE240

Reviews:

Related manuals for SE240

Brands by name

Popular brands

SMART SE240, Installation And User Manual

Search results

Summary of Contents for SE240

Reviews:

Related manuals for SE240

Brands by name

Popular brands