SMART SE240, Installation And User Manual

Page: 39 / 100

Configuring the SMART Hub SE240 33
1. Press Menu .
The Welcome Center appears.
2. Press Settings .
The Settings dialog box appears.
3. If a password is required to change the configuration settings, type the password in the box at
the bottom of the menu, and then press
OK .
NOTE: For information on the configuration settings password, see page 20.
4. Press Network and Conference .
5. Press Conferencing .
6. Select the Enable sharing with LinQ software check box to connect to LinQ software client
computers.
7. Select the Prompt before viewing a shared desktop using LinQ check box to prompt users
before connecting to LinQ software client computers.
8. Press Apply All .
You’ve configured LinQ software.
To configure LinQ software