SMART 3W72S2, Installation Manual, Page: 9 / 36

smart Wallbox Preparations, installation and taking into operation 5
‡ Preparations, installation and
taking into operation.
Introducing the product.
The smart Wallbox model variants are entirely manufactured in Germany and at all times comply with
the regulations and norms for the charging of electric vehicles applicable throughout Europe according
to IEC 61851-1, Mode 3 – please also refer to the section on”Guidelines & Norms.” on page 26. According
to their requirements, users may select from models with charging socket or fixed charging cable, which
are designed for domestic and also for semi-public applications.
We place the highest value on user safety in all our products. To this end, your wallbox provides inte-
grated DC fault current detection, ensuring the proper functioning of upstream RCCBs in case of DC fault
currents.
The wallbox is especially easy to operate during everyday use: Three LED lights in the lower part of the
housing cover allow you to check the current operating status at any time. Should a malfunction occur,
you can identify the cause by its specific LED error code without having to open the housing. After be-
ing taken into operation by a specialist contractor, the smart Wallbox is ready for charging at any time,
while each charging process must be separately authorized via the integrated key switch.
Unpacking and components included.
The smart Wallbox package includes a range of accessory components needed for installation and prop-
er operation. Therefore, please check immediately after unpacking (together with the customer, if re-
quired) whether the following components are included:
Component Quantity Description
Wallbox 1
Charging station, consisting of plastic housing with lockable cover
and separate mounting plate.
Quick start guide 1 Quick start guide including safety notices in printed form
Installation kit 1
Set of fixings for wall mounting, consisting of 2 x 4 screws as well as
matching wall plugs, triangular key, key for the key switch (2 pcs),
strain relief including screws (2 pcs), sealing grommets for openings
at the back of the housing (3 pcs)
Should one or more components be missing after unpacking, please contact your local smart partner
immediately.
02