SMART 3W72S2, Installation Manual, Page: 10 / 36

Identifying your model variant.
The smart Wallbox is available in a range of model variants that are mechanically and electrically tai-
lored to different usage patterns.
An additional product label with the specific smart product iden-
tification number for the wallbox is located on the underside of the
wallbox. For identification, the model code (A000 906 XX XX) as well
as the power supply ratings (voltage, frequency, current) indicated
below it are especially relevant.
When you open the housing cover for installation, you will find
behind it an additional product information label on the lower part
of the electronic components cover, which will also carry the ABL
model number.
Using the smart product identification number, please always en-
sure before installation that your wallbox model variant is the one
whose installation is described in this document.
The following wallbox model variant is the subject of this manual:
smart product
identification number ABL
model number
Grid connection Model Variant
A0009069106 3W72S2
see product
sticker Fixed charging cable according to IEC 62196-
2 Type 1, ca. 7.4 m; charging output 7.2 kW
WARNING!
The information and technical specifications contained in this manual relate exclusive-
ly to the model variant mentioned in this manual and must not be transferred to other
wallbox models. These variants include specific instruction manuals where necessary.
Should your wallbox variant not be described in this manual, please contact your local
smart technical support service: Do not under any circumstances install the wallbox in
this case, as this could lead to damage to the wallbox, to injury and/or death.
General requirements of the installation site.
Your smart Wallbox is an electrical device and is therefore subject to particular requirements for indoor
and outdoor installation. In selecting the installation site, you must consider the following points:
> Consider all local regulations for electrical installations, fire protection and accident prevention.
> The wallbox must be installed where it is freely accessible to all authorized users.
> A parking spot must also be planned for in front of the wallbox so that the vehicle can at all times be
reached with the integrated or with an external charging cable.
3W22S200001
120 to
140 cm