SMART 3W72S2, Installation Manual, Page: 25 / 36

smart Wallbox Error detection and solutions 21
Position Description Explanation
5
Setting the maximum
charging current
8 A
6 10 A
7 13 A
8 16 A
9 20 A
A 30 A
B 32 A
C 64 A
D
Return to factory setting (16 A)
E Testing mode See position 2
F Normal operation Setting for normal charging operations
The following settings can be selected using the S3 rotary encoder on the right:
Position Description Explanation
0 Normal operation Setting for normal and testing operations
1 0x01
When the S1 rotary encoder is set to position 3 (see above)
you can allocate the wallbox a different device ID using
the positions of the S3 encoder. Changing the device ID is
intended for future applications and currently does not
affect the operation of the wallbox. It is therefore recom-
mended not to make any changes and to generally leave
the S3 rotary encoder in the 0 position.
2 0x02
3 0x03
4 0x04
5 0x05
6 0x06
7 0x07
8 0x08
9 0x09
A 0x0A
B 0x0B
C 0x0C
D 0x0D
E 0x0E
F 0x0F
Taking the product out of and back into operation.
If required, you can take the wallbox out of operation. To take the wallbox out of operation, please pro-
ceed as follows:
1. Switch off the external RCCB (connection to the electricity grid is interrupted).
2. In addition, switch off the upstream MCB(s).
3. Always observe the five golden rules of electrical installation!
Now, no charging procedure can be carried out with the wallbox and it can be uninstalled if required.
To take the wallbox back into operation at a later time, please proceed as follows:
1. Switch on the upstream MCB(s).
2. In addition, switch on the external RCCB (connection to the electricity grid is established).