Smart Lift SL 380 MIDI, User Manual

Page: 10 / 30

US SL 380 MIDI 03-2016
10
Operation of VACUUM function: (page 13)
This function (pos. 5) will switch vacuum on and off. The vacuum pump is controlled
by a vacustat. The pump starts at -0,53 and stops at -0,62.
The vacuum function is operated by the slide valve and safety button on top of the
arm. To activate vacuum push the slide valve forward. To deactivate vacuum pull
out the safety button and pull back the handle on the slide valve.
Control Panel (pos. 32) for arm and yoke : (pages 8, 9, 15)
Users should make a point of reading the function description below, so as to
become familiar with the functioning of the machine.
Smart LIFT is operated manually. This machine generally has four functions which
may be operated individually.
UP/DOWN function:
This function will make the arm move either up or down. The movement is made via
the actuators, (pos. 24).
TILTING function:
This function will make the work turn round. The movement is made by actuator,
(pos. 21).
TELESCOPIC ARM function:
The movement is made via actuator, placed under the lift arm, (pos. 23).
SIDE DISPLACEMENT function:
This movement is performed via actuator, placed between the two front wheels.
(pos. 22).
Electric functions: (pages 9, 11, 14)
STOP/EMERGENCY STOP function:
The emergency stop button (pos. 33) is placed on the actual control panel. This
button will switch off actuators, electric control, as well as drive motor.