Smart Lift SL 380 MIDI, User Manual

Page: 20 / 30

US SL 380 MIDI 03-2016
20
2. Stop-Down at ”movements” controlled via control panel
If – no response to pushing control panel, all functions
Has emergency stop been released? Reconnect emergency stop by turning the release pressure. Check
whether main switch is on (placed on battery case between lift actuators) – to be turned clockwise to
switch on.
Check whether the control panel connector is correctly placed in the control box. Have batteries been
charged? – on/off button on handle for drive should be on to read battery indicator?
Is 30-ampere fuse in control box OK?
Has the safety switch been activated? If activated, try to deactivate by pulling in the telescopic arm, or act
as follows:
The safety switch has correctly switched off
the machine.
To re-establish function on the machine,
you may, for instance, using a screwdriver
push up the switch, and the safety switch
will resume its function
The telescopic arm is run back in, and work
too heavy for the machine is lowered back in
place. Should the safety switch switch off
again at this manoeuvre, you may, using
your body weight, push the machine in place
by applying pressure on the weight blocks.
© 2006 Copyright. www.smartlift.dk
© 2006 Copyright. www.smartlift.dk
© 2006 Copyright. www.smartlift.dk