SMAR fy303, Operation, Maintenance & Instruction Manual

Page: 68 / 114

FY303 – Operation, Maintenance and Instructions Manual
3.42
By choosing “Pressure Diagram”, the real position may be drawn by the sensor selected on figure 3,
as shown on figure 9. If no sensor was selected, the “Pressure Diagram” option will not be seen on
the “View” menu.
Figure 9 – Real Position x Pressure
Pressure sensors configuration data on the Transducer block
The pressure sensors are characterized on factory procedure, so, if the configuration data must be
checked, go the “Device” menu, choose “Transducer Offline” and click on the “Pressure Sensors”
tab, as shown on figure 10.