SMAR fy303, Operation, Maintenance & Instruction Manual

Page: 25 / 114

Operation
2.5
INDICATES THAT THE CONSTANT
OUTPUT MODE IS ACTIVE
FIX
%
MD
INDICATES ACTIVE MULTIDROP MODE
READOUT IN PERCENTAGE
UNIT AND FUNCTION FIELD
VARIABLE FIELD
INDICATES THE POSSIBILITY
TO CHANGE / ADJUST
VARIABLE / MODE
Figure 2.3 - Local Indicator
Upon receiving power, the
FY303 initializes the position indication on the display, by showing model
FY303 and its software version (X.XX).
Monitoring
During normal operation, FY303 remains in the monitoring mode. The display simultaneously shows
readout and some other information.
Normal displaying is interrupted when the magnetic tool is placed in orifice marked as “Zero” and the
indicator “MD” is showed on the display. After this, withdraw the magnetic tool off the Z orifice and
put it in the orifice marked with the “S” letter.
With the tool in the orifice, wait for 3 seconds. Withdraw again the magnet tool and wait for 3
seconds. Put it now in the S orifice and it will appear the message of “LOC ADJ“ (Local Adjust).
Withdraw the tool and put it in the Z orifice. After this, you can browse to all the parameters
configured in the display block.
Figure 2.4 - Typical Indicator