SMAR fy303, Operation, Maintenance & Instruction Manual

Page: 57 / 114

Configuration
3.31
The user shall write in this parameter until it reads 100% or the desired upper position value.
The LOWER and UPPER should be different.
LIMIT CONDITIONS OF CALIBRATION
LOPOS (Lower Position) Always equal 0%
UPPOS (Upper Position)
Always equal 100%
FEED - 10% =< FEED =< 110%, otherwise XD_ERROR = 22
NOTE
Codes for XD_ERROR:
16: Default Value Set
22: Out of Range
26: Invalid Calibration Request
27: Excessive Correction
Programming using Local Adjustment
Figure 3.23 - Step 1 - FY303
Figure 3.24 - Step 2 – FY303
Place the
magnetic tool in
orifice
S and wait
during 5 seconds.
In order to start the
local adjustment,
place the magnetic
tool in orifice Z and
wait until letters MD
are displayed.
Insert the magnetic
tool in orifice
S
once more and
LOC ADJ should be
displayed.
Remove the
magnetic tool
from orifice S .