Skyjack SJ85AJ, Operating Manual

Page: 39 / 106

SJ85AJ 208932AEA
39
Visual & Daily Maintenance Inspections Section 4 – Pre-operation
4.2-6 Control Compartment
Ensure all compartment latches are secure and in
proper working order.
1
Base Control Console
▪
Ensure all switches are returned to their
neutral positions.
▪
Ensure there are no loose or missing parts and
there is no visible damage.
2
Hydraulic Tank
▪
Ensure hydraulic filler cap is secure.
▪
Ensure tank shows no visible damage and no
evidence of hydraulic leakage.
3
Hydraulic Oil Level
▪
Be sure that the boom is in the stowed
position, and then visually inspect the sight
gauge located on the side of the hydraulic oil
tank.
▪
The hydraulic oil level should be between the
minimum and maximum marks on the sight
glass. Add oil as needed. Refer to Service
manual for recommended oil type.
4
Hydraulic Return Filter
▪
Ensure filter element is secure.
▪
Ensure there are no signs of leakage or visible
damage.
5
High Pressure Filter
▪
Ensure housing is secure and shows no visible
damage or leakage.
6
Brake Manifold
▪
Ensure all fittings and hoses are properly
tightened and there is no evidence of hydraulic
leakage.
▪
Ensure there are no loose wires or missing
fasteners.
7
Main Manifold
▪
Ensure all fittings and hoses are properly
tightened and there is no evidence of hydraulic
leakage.
▪
Ensure there are no loose wires or missing
fasteners.
8
Emergency Power Unit
▪
Ensure there are no loose or missing parts and
there is no visible damage.
▪
Ensure there are no loose wires or missing
fasteners.
▪
Ensure all fittings and hoses are properly
tightened and there is no evidence of hydraulic
leakage.
9
Fuel Tank
IMPORTANT
Before using your MEWP ensure there is enough
fuel for expected use.
▪
Ensure fuel filler cap is secure.
▪
Ensure tank shows no visible damage and no
evidence of fuel leakage.
1
2 4
5
9
8 7 6
3