Skyjack SJ85AJ, Operating Manual

Page: 41 / 106

SJ85AJ 208932AEA
41
Visual & Daily Maintenance Inspections Section 4 – Pre-operation
6
Wheel/Tire Assembly
▪
The MEWP is equipped with foam-filled tires.
Tire and/or wheel failure could result in a
MEWP tip over. Component damage may
also result if problems are not discovered and
repaired in a timely fashion.
1. Check all tire treads and sidewalls for cuts,
cracks, punctures and unusual wear.
2. Check each wheel for damage and cracked
welds.
3. Check each lug nut for proper torque to
ensure none are loose.
Refer to Section 7.6 for wheel/tire specifications.
WARNING
Do not use tires other than those specified for this
machine. Do not mix different types of tires. Tires
other than those specified can adversely affect
stability. Failure to operate with matched, approved
tires in good condition can result in death or
serious injury. Replace tires with the exact,
Skyjack-approved types only.
7
Turret Rotation Gear
Inspect from underneath the MEWP.
▪
Ensure there are no loose or missing parts and
there is no visible damage.
8
Rotary Manifold
Inspect from underneath the MEWP.
▪
Ensure all hoses are properly tightened and
there is no evidence of hydraulic leakage.
8
6
7