Skyjack SJ85AJ, Operating Manual

Page: 65 / 106

SJ85AJ 208932AEA
65
Refueling Procedure Section 6 – Additional Procedures
6.2 Refueling Procedure
This section provides the operator with the procedure
on how to refuel the engine.
WARNING
Failure to heed the following safety precautions
could result in death or serious injury:
▪
Use extreme caution while refueling MEWPs.
▪
Ensure that engine and all systems are turned
off before refueling.
▪
Refuel the MEWP only in a well ventilated
area away from open flame and other sources
of ignition, authorized by your employer and
supervisor.
▪
Never try to start a MEWP if you smell
gasoline.
▪
Gasoline engine models:
Use only unleaded gasoline with an octane
rating 87 or higher.
▪
Diesel engine models:
Use ultra low sulfur fuel only.
WARNING
Do not smoke in an area where MEWPs are stored
or refueled.
CAUTION
When operating on a slope, ensure fuel level is
above half to avoid a possible stall condition.
IMPORTANT
Before using your MEWP ensure there is enough
fuel for expected use.
6.2-1 Refuelling (Gasoline or Diesel)
IMPORTANT
Use unleaded gasoline or ultra low sulfur diesel as
indicated on fuel tank.
1. Ensure engine and all systems are turned off
and emergency stop buttons are depressed.
2. Open control compartment and remove fuel cap.
3. Carefully fill the fuel tank ensuring that no
spillage occurs.
4. Secure fuel cap.
5. Ensure there are no leaks in fuel system.
6. Wipe up any spilled fuel.
7. Dispose of rags in an approved container.