Skyjack SJ85AJ, Operating Manual

Page: 37 / 106

SJ85AJ 208932AEA
37
Visual & Daily Maintenance Inspections Section 4 – Pre-operation
4.2-5 Engine Compartment
Ensure all compartment latches are secure and in
proper working order.
1
Main Power Disconnect Switch
▪
Turn main power disconnect switch to
off position.
▪
Ensure there are no loose or missing parts and
there is no visible damage.
▪
Ensure all cables are secure and switch is in
proper working condition.
2
Batteries
▪
Proper battery condition is essential to good
engine performance and operational safety.
Improper fluid levels or damaged cables and
connections can result in engine component
damage and hazardous conditions.
WARNING
Explosion hazard. Keep flames and
sparks away. Do not smoke near
batteries.
WARNING
Battery acid is extremely corrosive - Wear proper
eye and facial protection as well as appropriate
protective clothing. If contact occurs, immediately
flush with cold water and seek medical attention.
1. Check battery case for damage.
2. Clean battery terminals and cable ends
thoroughly with a terminal cleaning tool or
wire brush.
3. Ensure all battery connections are tight.
4. If applicable, check battery fluid level. If plates
are not covered by at least 13 mm of solution,
add distilled or demineralized water.
5. Replace battery if damaged or incapable of
holding a lasting charge.
WARNING
Use original or manufacturer-approved parts and
components for the MEWP.
3
Hydraulic Pumps
▪
Ensure there are no loose or missing parts and
there is no visible damage.
▪
Ensure all bolts are properly tightened.
▪
Ensure all fittings and hoses are properly
tightened and there is no evidence of hydraulic
leakage
4
Muffler and Exhaust
▪
Ensure muffler and exhaust system are
properly secured, with no evidence of
damage.
5
Engine Control Console
▪
Ensure there are no loose or missing parts and
there is no visible damage
1
2
5
4
3