8
Installation
Service Manual
SKOPE OD1100N
Gravity Shelf
System
Gravity feed matting, including shelf dividers, is available for each shelf. The gravity shelf
system comes in two sizes to suit the different size shelves: 350 mm depth for the top four
shelves, and 385 mm for the bottom shelf. Each has 16 dividers.
Procedure 2: To fit the gravity feed matting and shelf dividers
1. Match up the shelf dividers with the corresponding matting.
2. Work across the matting and fit the centre dividers at required intervals.
3. Place the mat and dividers onto the matching shelf inside the cabinet.
4. Repeat for the remaining shelves.
5. To adjust the spacing between dividers:
•
Push the divider towards the rear of the cabinet until it unclips from the matting.
•
Move the divider to the required spacing, and insert into the slot in the matting kit.
•
Pull the matting towards the front of the cabinet to lock it in place.
