Ski-Doo Scandic Tundra Series, Operator'S Manual

Page: 37 / 115

CONTROLS, INSTRUMENTS AND EQUIPMENT
Heated Grips Switch
Select the switch position according to
the desired heating intensity to keep
your hands at a comfortable tempera-
ture.
mmo2007-003-003_b
TYPICAL
1. Heated grip switch
2. Hot
3. Warm
4. Off
Heated Throttle Lever Switch
Select the switch position according to
the desired heating intensity to keep
your thumb at a comfortable tempera-
ture.
mmo2007-003-003_c
TYPICAL
1. Heated throttle lever switch
2. Hot
3. Warm
4. Off
10) Headlights Dimmer
Switch (Tundra)
Use to select high beam or low beam.
mmo2010-007-006_a
1. Headlights dimmer switch
2. Low beam
3. High beam
11) Electronic Reverse
Button (RER) (Tundra)
The electronic reverse button is lo-
cated on the LH side of console.
Press to engage the electronic re-
verse. Refer to
REVERSE (RER) in
OPERATING INSTRUCTIONS
section
for procedure.
12) Heated Grips and
Throttle Lever Switch
(Tundra)
The heated grips and throttle lever
switch is located on the RH side of
console.
Select the switch position according to
the desired heating intensity to keep
your hands and thumb at a comfortable
temperature.
Heater elements are OFF when the
switch is in the horizontal position.
_______________
35