MAINTENANCE PROCEDURES
2. Open LH side panel, refer to
BODY
.
3. Remove belt guard, refer to
DRIVE
BELT GUARD REMOVAL
.
4. Keep the set screws from turning
using a 3 mm Allen key and loosen
the three lock nuts using a 10 mm
open wrench.
mmo2010-004-010_c
1. Lock nuts
2. Adjustment screws
mmo2010-004-009_a
LOOSEN THE LOCK NUTS
1. 3 mm Allen key
2. 10 mm open wrench
5. Turn one set screw 1/4 turn at a time
then rotate the driven pulley to prop-
erly set the belt between the pulley
sheaves.
Belt without External Cogs
Repeat step 5 until the external sur-
face of drive belt exceeds driven pulley
edge by 2 mm (.079 in).
mmr2009-081-001_a
PRELIMINARY SETTING
A. 2 mm (.079 in)
Belt with External Cogs
Repeat step 5 until the bottom of
grooves on the external side of drive
belt are flush with the driven pulley
edges.
mmr2008-040-108_a
PRELIMINARY SETTING
1. Driven pulley edge
2. External drive belt grooves
All Drive Belt Types
NOTE:
Turning the set screws clock-
wise lowers the belt in the pulley. Turn-
ing the set screws counterclockwise
raises the belt in the pulley.
6. Turn the other set screws clockwise
so that they just contact the bottom.
Do not screw any further
7. Keep
the
set
screws
from
turning
and
tighten
the
lock
nuts
to
8 N•m ± 2 N•m
(71 lbf•
in
± 18 lbf•
in
)
8. Install belt guard, refer to
DRIVE
BELT GUARD INSTALLATION
.
9. Close side panel, refer to
BODY
.
NOTE:
This setting is correct as a pre-
liminary adjustment for most models
and belt types. In some cases, when
starting the engine, the vehicle could
creep, indicating that the belt is too
tight.
68
______________
Summary of Contents for Scandic Tundra Series
