Ski-Doo Scandic Tundra Series, Operator'S Manual

Page: 61 / 115

MAINTENANCE SCHEDULE
*10-hour or 500 km (300 mi)
Weekly or every 250 km (150 mi)
Monthly or every 800 km (500 mi)
Every year or 3200 km (2000 mi)
Every 2 years or 6000 km (3700 mi)
*Storage
A: Adjust
C: Clean
I: Inspect
L: Lubricate
R: Replace
* To be performed by
an authorized SKI-DOO dealer
*Preseason
PART/TASK LEGEND
DRIVE SYSTEM
Drive belt (4) I I I
Drive pulley (5) I I C I C
Driven pulley (6) I I C I C
Drive chain A A A
Chaincase oil R
Track (7) A
(8)
(4) Adjust drive belt height and have
the tension checked by an authorized
Ski-Doo dealer at every belt replacement.
(5) Tightening torque of drive pulley must
be checked at the 10-hour inspection and
every year or 3200 km (2000 mi) thereafter.
(6) Driven pulley preload should be checked
at the 10-hour inspection and every
year or 3200 km (2000 mi) thereafter.
(7) Check track condition before each ride.
(8) Adjust track tension and alignment as
required.
BRAKE SYSTEM
Brake fluid I I R I
Brake hose, pads and disk I I I
Brake Lever L
—
STEERING
Steering mechanism (9)
I,
L
I L I, L
Skis and runners I I I
(9) Lubricate whenever the vehicle is used
in wet conditions (wet snow, rain, puddles).
SUSPENSION
Front suspension (9) I
I,
L
I, L
Rear suspension (9) I
I,
L
I, L
Suspension stopper strap I I
(9) Lubricate whenever the vehicle is used
in wet conditions (wet snow, rain, puddles).
_______________
59