Ski-Doo Scandic Tundra Series, Operator'S Manual

Page: 64 / 115

MAINTENANCE PROCEDURES
This section includes instructions for
basic maintenance procedures. If you
have the necessary mechanical skills
and the required tools, you can per-
form these procedures. If not, see
your authorized Ski-Doo dealer.
Other important items in the mainte-
nance schedule that are more difficult
and require special tools are best per-
formed by your authorized Ski-Doo
dealer.
WARNING
Turn off the engine, remove tether
cord cap and follow these mainte-
nance procedures when perform-
ing maintenance. If you do not
follow proper maintenance pro-
cedures you can be injured by hot
parts, moving parts, electricity,
chemicals or other hazards.
WARNING
Should removal of a locking device
(e.g. lock tabs, self-locking fasten-
ers, etc.) be required when un-
dergoing disassembly/assembly,
always replace with a new one.
NOTICE
LH and RH hand side car-
buretors are calibrated differently.
Never switch carburators around.
Air Filter
Air Filter Verification
Ensure the air filter is properly installed,
clean and in good condition.
mmo2010-007-012_a
1. Air filter
NOTICE
To prevent engine dam-
age, never operate with a damaged
or missing air filter.
Air Filter Removal
1. Refer to
BODY
and remove hood
and LH side panel.
2. Release all 5 air filter retaining clips.
mmo2010-007-013_a
1. Retaining clip
2. Air filter
Air Filter Cleaning
Rinse air filter with fresh water. Allow
to dry completely before installation.
Air Filter Installation
1. Push air filter onto air intake silencer
and secure using all 5 clips.
NOTE: If some clips do not engage
properly, the filter may not be posi-
tioned correctly onto the air intake si-
lencer.
62
______________