Ski-Doo REV XP 2008 Series, Operator'S Manual

Page: 84 / 155

With the snowmobile completely
stopped and engine running at idle,
press and release the RER button.
The RER pilot lamp will blink when the
snowmobile is engaged in reverse.
Apply throttle slowly and evenly. Al-
low drive pulley to engage then accel-
erate carefully.
Shifting in Forward
With the snowmobile completely
stopped and engine running at idle,
press and release the RER button.
RER pilot lamp will stop.
Apply throttle slowly and evenly. Al-
low drive pulley to engage then accel-
erate carefully.
Shutting Off the Engine
Release throttle lever and wait until
engine has returned to idle speed.
Shut off the engine using either en-
gine cut-out switch or tether cord cap
(DESS key) engine cut-out switch.

WARNING
Always remove the tether cord cap
(DESS key) when vehicle is not in
operation in order to prevent acci-
dental engine starting or to avoid
unauthorized use by children or
others or theft.
Post-Operation Care
Shut off the engine. Install rear of ve-
hicle on a wide-base snowmobile me-
chanical stand.
Remove snow and ice from rear
suspension, track, front suspension,
steering mechanism and skis.
Always cover your snowmobile when
leaving it outside overnight or during
extended periods of inactivity. This
will protect it from frost and snow as
well as help retain its appearance.
82
______________________