Ski-Doo REV XP 2008 Series, Operator'S Manual

Page: 70 / 155

CAUTION: Do not attempt to adjust
spark plug gap.
26) Spare Drive Belt Holder
A spare drive belt can be stored in
holder.
NOTE: Spare drive belt is not supplied
with the snowmobile.
CAUTION: To avoid damages to the
drive belt, ensure that belt does not
come in contact with tuned pipe
when installed in its support.
mmo2008-003-056_a
WRONG INSTALLATION
1. Drive belt in contact with tuned pipe
mmo2008-003-018_a
INSTALLED CORRECTLY
1. Drive belt over bumper
2. Ensure there is no contact with tuned pipe
27) Shields and Guards

WARNING
Never operate engine without belt
guard securely installed or, with
hood, brake disk guard or side pan-
els opened or removed.
Your snowmobile is provided with a
number of shields and guards. Leave
these in place on your vehicle as they
are designed to keep clothing and
hands out of moving parts and away
from hot components. Never attempt
to make adjustments to any moving
part while the engine is running.
mmo2008-003-015_b
TYPICAL
1. Side panels
2. Upper front hood
3. Lower front hood
mmo2008-003-062_a
1. Belt guard
2. Brake disk guard
28) Track

WARNING
Never stud a track that has not
been
approved for studs. In-
stalling studs on an unapproved
track could increase the risk of the
track tearing or severing, possibly
resulting in serious injury or death.
68
______________________