Ski-Doo REV XP 2008 Series, Operator'S Manual

Page: 78 / 155

Always maintain a sufficient amount
of recommended injection oil in the
injection oil reservoir.
Use only two-stroke engine injection
oil sold by authorized SKI-DOO deal-
ers.
CAUTION: Check level and refill ev-
ery time you refuel.
mmo2007-009-021_a
TYPICAL
1. Injection oil reservoir
2. Level marks (1/4, 1/2, 3/4)

WARNING
Do not overfill. Reinstall cap and
fully tighten.
Wipe off any oil
spills. Oil is highly flammable
when heated.
RECOMMENDED INJECTION OIL
XP-S synthetic oil (2) (3)
XP-S synthetic blend (2) (3)
XP-S mineral injection oil (4)
ENGINES
500SS X X X
600 HO SDI
— X
(1)
X
800R Power TEK
— X
(1) X
(1) Prefered.
CAUTION: (2) XP-S synthetic oil and
XP-S synthetic blend oil are spe-
cially formulated and tested for the
severe requirements of these en-
gines. Use of any other brand two-
stroke oil may void the limited war-
ranty. Use only XP-S synthetic oil
or XP-S synthetic blend. There is
no known equivalent on the market
for the moment. If a high quality
equivalent were available, it could
be used.
(3)
XP-S synthetic oil and XP-S
synthetic blend injection oil are
compatible,
they can be mixed
together.
(4)
If not available, API TC high-quality
low ash two-stroke injection oil may
be used.
CAUTION: Never use four-stroke
petroleum or synthetic motor oil
and never mix these with out-
board motor oil. Do not use NMMA
TC-W, TC-W2 or TC-W3 outboard
two-stroke engine oils or ashless
two-stroke engine oils. Avoid mix-
ing different brands of API TC oil as
resulting chemical reactions may
cause severe engine damage.
XP-S Mineral Injection
This is a special blend of basic oil and
additives specially selected to ensure
unequalled lubrication, engine cleanli-
ness and minimum spark plug fouling.
XP-S Synthetic and XP-S
Synthetic Blend Oil
The XP-S synthetic blend and XP-S
synthetic oil
provides superior lubri-
cation , reduced engine component
wear and oil deposit, thus maintaining
maximum-level performance and an-
tifriction properties. These synthetic
and synthetic blend injection oil meets
the latest ASTM and JASO standards
by ensuring high biodegradability and
low exhaust smoke.
76
______________________