Ski-Doo REV XP 2008 Series, Operator'S Manual

Page: 65 / 155

WARNING SIGNALS
BEEPER DISPLAY MESSAGE
DESCRIPTION
2 shorts WELCOME... Personalized welcome message, good key
Slow short beeps/
repetitive
CHECK KEY
Unable to read key
(bad connection)
Make sure the key
is free of dirt or
snow. Reinstall key
and restart engine.
Vehicle can not be
driven.
Fast short beeps/
repetitive
BAD KEY
Invalid key or
key not programmed
Use the proper key
for this vehicle
or have the key
programmed.
Vehicle can not be
driven.
15) Engine Cut-Out Switch
Push-pull type switch. To stop the en-
gine in an emergency, select OFF posi-
tion (down) and simultaneously apply
the brake. To restart, button must be
at the ON position (up).
mmo2007-009-038_a
OFF POSITION
mmo2007-009-038_b
ON POSITION
All operators of the snowmobile
should familiarize themselves with
the function of this device by using
it several times on first outing and
whenever stopping the engine there-
after. This engine cut-out procedure
will become a reflex and will prepare
operators for emergency situations
requiring its use.

WARNING
If the switch has been used in an
emergency caused by a suspect-
ed malfunction, the source of the
malfunction should be determined
and corrected before restarting en-
gine. See an authorized SKI-DOO
dealer for servicing.
16) Rewind Starter Handle
Auto-rewind type located on right
hand side of snowmobile. To engage
mechanism, pull handle slowly until a
resistance is felt then pull vigorously.
Slowly release handle.
17) Choke Lever
See proper usage instructions in OP-
ERATING INSTRUCTIONS section.
This device features a 3-position lever
to facilitate cold start.
_____________________
63