Ski-Doo REV XP 2008 Series, Operator'S Manual

Page: 30 / 155

mmo2008-003-065_a
mmo2008-003-069_a
Instruction 1
BEFORE STARTING :
1. Attach tether cord to your clothing.
2. Check proper operation of the throttle and
brake levers each time before starting.
They must return to their initial position
when released.
3. Apply parking brake.
4. Turn handlebars all the way in both
directions to check for interference and
insure free operation.
AFTER STARTING :
1. Pull-out tether cord to check if engine
shuts off.
2. Re-start and push in engine cut-off switch
to check if engine shuts off.
3. Disengage parking brake before riding to
avoid fading.
• Read and understand all warning labels and
operator’s guide before operation. Operator's
guide is located in the under seat base. Pull
latch located under front lip of seat and slide it
to the rear to have access. If guide is missing,
ask your dealer for a new one.
• Get familiar with your vehicle. Inexperienced
riders may overlook risks and be surprised by
vehicle’s specific behavior and terrain
conditions.Ride slowly.
• Excessive speed and reckless driving can kill !
ALWAYS adjust your speed according to snow
conditions and circumstances.
• Steering control and braking ability may be
reduced on hard-pack snow, ice or roads.
Reduce speed & allow more space to stop
or turn.
• Respect laws on minimum operator age.
Manufacturer recommends a minimum
operating age of 16 years old.
• Never open side panels or hood while engine
is running or if vehicle is in motion. Ensure to
remove DESS key before opening those.
mmo2007-009-050_en
Instruction 2
mmo2007-009-051
Instruction 3
Ce garde-courroie doit TOUJOURS être en place lorsque le
moteur fonctionne. Attention aux pièces en rotation _ elles
peuvent vous blesser ou capter vos vêtements.
This guard must ALWAYS be in place when engine is running.
Beware of rotating parts _ they could cause injuries or
catch your clothing.
WARNING
AVERTISSEMENT
516 002 670
A33A2FA
Instruction 4
Attention aux pièces CHAUDES!
Beware of HOT parts!
516002664
A33A2GA
Instruction 5
mmo2008-003-007
28
___________
SAFETY INFORMATION
___________