Ski-Doo REV XP 2008 Series, Operator'S Manual

Page: 119 / 155

mmo2008-003-044_a
TURN TOOL COUNTERCLOCKWISE
Then, to open the driven pulley use the
following tool from tool kit.
mmo2008-003-042
SUSPENSION ADJUSTMENT TOOL
Completely open the driven pulley by
turning the suspension adjustment
tool clockwise.
Turn tool clockwise until it bottoms.
mmr2008-042-001_a
1. Suspension adjustment tool
2. Adjustment ring
To remove the drive belt, slip the belt
over the top of driven pulley.
mmr2008-042-002
Remove drive belt from drive pulley.
Install and adjust drive
belt, refer to DRIVE BELT
INSTALLATION/ADJUSTMENT .
Drive Belt Installation/
Adjustment
NOTE: The drive belt height must be
checked each time a drive belt is in-
stalled and should be rechecked after
50 km (30 miles).
The maximum drive belt life span is
obtained when the arrow on the drive
belt is directed toward the front of the
vehicle. This will ensure that correct
direction of rotation is respected.
mmo2008-003-045_a
1. Arrow pointing the front of vehicle
NOTE: If your drive belt was broken
while riding, you will need to open
the driven pulley sheaves first before
trying to install a new belt. Refer to
DRIVE BELT REMOVAL for procedure.
Install drive belt.
_____________________
117