1
- 15 -
951-180-083-EN
Version 02
EN
1. Safety instructions
1.18 Transport, assembly, maintenance, malfunction, repair, shutdown, disposal
limbs can be pinched by unintended
movements.
○
Assemble the product only outside the
operating range of moving parts, at an
adequate distance from sources of heat
or cold. Other units of the machine, the
vehicle must not be damaged or impaired
in their function by the installation.
○
Dry any wet, slippery surfaces or cover
appropriately.
○
Cover hot or cold surfaces appropriately.
○
Work on electrical components may be
performed only by qualified electricians.
Note possible waiting times for discharge.
○
Work on electrical components may be
performed only in a voltage-free state
and using tools suitable for electrical
work.
○
Establish the electrical connection only in
accordance with the valid circuit diagram
and in observance of the relevant regula-
tions and the local electrical operating
conditions.
○
Do not touch cables or electrical compo-
nents with wet or moist hands.
○
Fuses must not be bridged. Always re-
place defective fuses with fuses of the
same type.
○
Ensure proper grounding of the product.
○
Drill required holes only on non-critical,
non-load-bearing parts of the opera-
tor's machine/infrastructure. Use existing
boreholes. Do not damage lines or cables
when drilling. Modifications to SKF prod-
ucts are prohibited. This also includes
all drilling, welding, firing, and grinding
work.
○
Prior to the start of this work, all relevant
persons must be notified of it. Precau-
tionary operational measures, work
instructions must be observed.
○
Transport only with suitable transport
and lifting gear on suitable paths.
○
Maintenance and repair work can be
subject to restrictions at low or high tem-
peratures (e.g., altered flow properties
of the lubricant). Maintenance and repair
work should therefore preferably be per-
formed at room temperature.
○
Prior to performing work, the product
and the machine in which the product
will be integrated must be de-energized,
depressurized, and secured against un-
authorized activation.
○
Take appropriate measures to ensure
that moving, detached parts are im-
mobilized during the work and that no
Summary of Contents for LINCOLN VP Series
Page 115: ...115 951 180 083 EN Version 02 Notes...
Page 117: ......
