Super Shot Deluxe
Assembly and Operating Manual
Page 42 of 52
Sound PCB
This PCB is mounted to the top of the logic and towards the top of the game. It creates all sounds for the game.
Volume control is located on the top of the Chassis Plate. This is a small round device, and it is labeled accordingly.
Volume is increased by turning clockwise.
Power Distribution PCB
This PCB is located directly between the Sound PCB and the Power Supply. It generates 20 VAC for the moving
message display. Voltages, Should read 24 VAC between the black and red wires and 12.00 VAC between the black and
white or red and white.
Power Supply
This is a chrome metal box mounted directly next to the logic PCB. This unit converts the AC voltage coming from the
wall outlet into +5, +12 and -5DC voltages. The push-button on/off switch is a small metal button. The voltage adjust is
located 2” to the left of the on/off switch and adjusts voltage up counter clockwise.
Voltages should never be measured
at the supply.
AC Line Fuse
This fuse is located on the upper right hand side of the power supply. In the event a “short” should occur anywhere in the
AC system, the fuse will blow in order to protect the system.
Replace with a 5 Amp, Slow-Blow fuse only.
Moving Message Display
The display is located in the center of game. This unit displays game status and test information.
There are three L.E.D.s located on the left side of the game and they are visible from left side of game and behind display.
View the LEDs through the 1” diameter hole.
Red
= Sign is in reset when steady on. Normal operation is, when game is powered-up and the L.E.D.
comes on then turns off and stays off.
Orange = Data is being received from logic when flickering.
Green
= Health light should be flashing at one second intervals, when operating properly.
