Super Shot Deluxe
Assembly and Operating Manual
Page 7 of 52
Super Nut
The nut that moves back and forth on the Acme Screw
Target Light
Fluorescent bulb located at the back of the Rear Assembly. Lights the Crowd Panel and Backboard. May be
removed when servicing the game.
Pre-assembly
1. Inspect the game for any possible shipping damage.
2. Remove the Canopy
3. Cut the large black ty-wraps holding the Right and Left Netting Panels at either Side in four places and remove
from pallet.
4. Remove the Ball Guard from under the Rear Assembly.
5. Cut the banding securing the Front Assembly to the pallet and slide it out from under the Rear Assembly.
6. Discard the gray foam protectors.
7. Unbolt Rear Assembly from pallet and slide off pallet.
8. Locate the hardware listed below in the coin box.
NOTE: Keys are cable tied on cross-pipes in the Center of
Rear Assembly at front.
¼ -20 x 1” long button head Allen bolts
¼ flat-washers
¼ -20 nyloc hex nuts
