Super Shot Deluxe
Assembly and Operating Manual
Page 9 of 52
Assembly
1. Locate the Front Leg and attach to the Front Assembly using one Allen bolt through the third hole from the
bottom. You may make slight adjustments in the height of the Front Assembly by using a crescent wrench on the
leveler at the bottom of the Front Leg.
2. Position the Front Assembly in front of the Rear Assembly and line up the 1-1/2” tubes protruding front the rear
of the Front Assembly with those corresponding 1-3/4” tubes under the Scoreboard. Slide the Front Assembly
into the Rear Assembly. Adjust the leg leveler until it lines up the holes for the mounting bolts located under the
scoreboard.
3. Locate the Backboard Assembly. Lift the Backboard Assembly over the rear of Rear Assembly. Insert it into the
tubes at the rear of the rear assembly.
