Super Shot Deluxe
Assembly and Operating Manual
Page 6 of 52
Limit Switch
The two switches on the Motor-Screw Assembly, one mounted at each end of the Acme Screw. They inform the
Motor Control Board of the Apron Assembly’s movement to either end of the Acme Screw.
Logic Board
Located on the Electronic Chassis Plate to the left of the Power Supply and is the circuit board, which controls the
game.
Motor Access Panel
Painted Metal Door at the back of the Rear Assembly. Removed to access the Motor-Screw Assembly.
Motor Control Board
The circuit board assembly that is part of Motor-Screw Assembly.
Motor Plate Assembly
The assembly which consists of the Gear Motor, Screw, Coupler, Acme Screw, Super-Nut, Pillow Block, Motor
Control Board, Screw Sensor, Precision Shafting and four Bearings all mounted on the Motor Plate.
Netting Panels
The two steel wire panels that are attached above and to each side of the Rear Assembly during assembly.
Network Interface Board
Located on the Logic Board. The PCB that interfaces with the other games in a linked network of Super Shots.
Pillow Block
The bracket at the front of the Motor-Screw Assembly which holds the Acme Screw.
Power Distribution Board
Located on the Electronic Chassis Plate immediately above the Power Supply.
Power Supply
Located on the Electronic Chassis Plate at the bottom right side. The Power Button is located on the top of the
Power Supply and the 5 Amp and the Slow-Blow Fuse is on the upper right side.
Rear Assembly
The back and largest piece of the game.
Scoreboard
LED display located at the top front rear of the Rear Assembly behind the Display Glass.
Screw Coupler
The coupler that connects the Gear Motor to the Acme Screw.
Screw Sensor
Part of the Motor Screw Assembly. It senses the turning of the Acme Screw and thereby movement of the
Backboard.
Sound Board
Located on the Electronic Chassis Plate, above the Power Distribution Board.
Speaker
Two of these mounted in the Display Glass.